Easy Methods for Fixing the DPC WATCHDOG VIOLATION Stop Code Error on Windows

 Windows desktop is never short of errors, and every error needs a different solution. Some of the errors can be fixed on our own without any help from the technical experts. One such error that you can fix on your own is the “DPC Watchdog Violation.” This error usually occurs due to the system hardware issues and notifies you that the Windows couldn’t communicate with the hardware properly. After the initial days of finding errors in Windows SSDs, the developers realized the need for updated drivers for Windows 10.

Lack of driver support caused a lot of errors and issues a few years ago. The errors were also found in Deferred Procedure Call, a system-level process in the background. It receives the details when any hardware wants to communicate with the CPU, but it is usually going out of track. If the DPC remains unfixed for a specific time limit, it creates the DPC Watchdog Violation error.

Most of the time, the DCP error gets fixed after checking the hardware, driver, and system updates. You might even have to reset the hardware on your Windows PC. Following are some of the methods you can use to get rid of the “DPC WATCHDOG VIOLATION” error code:

Reseat Your System Hardware

When you experience the DPC error, the first thing you should do is to check the system hardware and ensure if everything is in its place. Check if the cables are loose, the drive is fitted properly, if the RAM is unseated, etc. You should also clean the surface and the hardware with a can of compressed air. Ensure that you clean everything gently, and the components are delicate and must be handled with care so that the PC can last a long time.

System Health Check

Once you have completed the physical cleaning, you must move ahead to do a system health check using a third-party tool. Such a type of tool will show any component or hardware on your PC is not in a good state and is about to fail. In this case, we recommend using Speccy, a Windows PC health tool that will show you a wide range of health indicators on the system and let you check everything properly.

Install Speccy and open multiple tabs and a drop-down menu to check your drive health, voltage, etc. It would be best if you replaced or fixed the components in which this app shows the highest number of faults. If any error or fault gets detected on your SSD, you must check where the problem resides.

Update Drivers

Usually, Windows 10 updates the drivers automatically, but it is always wise to check the updates and update the drivers manually. Doing so will ensure the overall protection of your drivers. You can check the latest driver updates from the Settings of your PC. From Settings, go to Update & Security and select Windows Update. Then, click on View Update History to check the update’s status and history. Now, insert “device manager” in the Start Menu search bar of your PC. Choose the best match and click on Disk Drives to get a list of options. When you locate your SSD, give a right-click on it. Then, select Update Driver followed by ‘Search Automatically for Updated Driver Software.’

Apart from this method, you can also check the Update & Security section in the Settings app. Then, click on Windows Update and install the update if available. These two updates should fix the issue.

Run SFC and CHKDSK

One of the best ways to resolve this error is by using the SFC and CHKDSK utility tools. The System File Check (SFC) – a system utility tool that scans your drive and fixes errors. But it is necessary to check the SFC tool before running it on your PC. And for this purpose, you will need the DISM tool. Here are the steps you have to follow for checking on the SFC utility tool:

• In the Start menu, search bar Command Prompt (Admin) and give a right-click on it.
• Select Run as Administrator for opening an elevated Command Prompt.
• Now, insert the following command and hit the Enter key:

DISM /online /cleanup-image /restorehealth

• Once the command starts running, it will take a few minutes for the process to complete.
• When the process completes, insert the “sfc /scannow” command and hit the Enter key.

Now, you can move on to use the CHKDSK Windows system tool for checking your file structure. It will scan if there are any errors on your drive. You have to run the CHKDSK scan from the Command Prompt, and here are the steps to do so:

• On the Start menu search bar, insert the command prompt, and give a right-click on a suitable match.
• Select ‘Run as Administrator.’
• Now, insert ‘chkdsk /r’ and hit the Enter key, and let it scan your system for errors.
• Note that CHKDSK will fix the errors and issues along the way while scanning.

By now, you must have got ridden of the DPC Watchdog Violation error. If these methods still don’t work for you, you should remove any Recently Installed app from the PC. You can also try to reboot the system to remove this error permanently.

Hi, I’m Kinsley. I am working as an IT professional I’m a web developer living in Pontiac, USA. I Interested in web development, programming, and entrepreneurship. also interested in innovation With new creativity. You can read my blog with a click on the button above. beeyos.com

Source: DPC WATCHDOG VIOLATION